你的位置:首页 > 新闻动态 > 公司新闻

庆祝我司与ZUCCHETTI CENTRO SISTEMI SPA合作成功

2015/9/1 0:27:12      点击:

5月6日,ZUCCHETTI CENTRO SISTEMI SPAL从我司订购IP4X IEC61032 TEST PROBED with 1N Thrust 一套,可见公司对测试设备的重视度。

Basic Introduction:

1. According to: GB/T4208-2008 / IEC 61032:1997 / IEC 60529:2001 AND UL

2. IP4X Test Probe D ( Test Probe D) is necessary appliance for household and similar electrical appliance of against electric shock protection test.

Technical parameters:

1. Test Probe Length: 100mm

2. Test Prober Diameter: 1.0mm

3. Dam- sphere Diameter: 35mm

4. Handle Diameter: 10mm

5. Handle Length: 100mm

6. According to IEC 61032 figure 4 (the Test probe D), Table 6 GB/T4208-2008 (the first characteristic digital 4/5/6)

Application:

1. Standard test refers to the joint part can't touch the live parts or close to the dangerous parts, 30mm circular baffle can not be enter.

2. In the test requirement for preventing access to the hazardous parts, Test Probe D need to be with thrust 1±0.1N